Denver CR-718 Mode D'emploi page 8

4. Use the Tune+ or Tune- button to select the desired preset station
(P01-P10)
5. Press the memory / memory + button again to set the preset.
6. Repeat steps 2 through 5 to set more presets.
7. The unit can preset 10 stations totally for FM.
8. When "P01-P10" is blinking, press the Tune+ or Tune- button to
select the preset number.
9. When recalling preset stations, press memory / memory + button to
select the preset number.
TO USE THE WEATHER FORECASTER
There is a built-in humidity sensor in your unit to make the weather
forecast. There are four types of weather display in your weather
station (please note that the weather graphics may look a little different
to those on your unit)
Remarks: for better use of your weather station, place your unit at
a location with open air circulation e.g. close by an open window.
Placing it at an air-conditioned environment will affect its accuracy.
After your weather station is powered up, it will take around 3 hour to
get stable. The weather icons on the display give a reference to the
next 12-24 hours weather conditions. It may not match with the current
weather condition outside.
Predictions accuracy: 70%; prediction of the considerable weather
changes (for example, from sunny weather to rain) is more accurate
then prediction of negligible weather changes (from partly cloudy to
cloudiness).