Unpacking The Appliance; Putting Into Service - Profi Care PC-VL 3065 WM Mode D'emploi

• Do not repair the appliance by yourself. Always contact an au-
thorized technician. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.

Unpacking the Appliance

1. Remove the device from its packaging.
2. Remove all of the packaging material such as foils, filling
material, cable holders and cardboard packaging.
3. Check the scope of delivery.
4. Check the appliance for any transport damage to prevent
a hazard.
NOTE:
• The device comes fully assembled.
• There may still be dust or production residues on the
surface of the device. We recommend that you quickly
wipe off the housing with a damp cloth.
Mains Cable
Unwind the mains cable fully from the back of the appliance.
Position
The ideal position is a non-slip, flat surface.

Putting into Service

Electrical Connection
• Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
• Connect the device to a duly installed protective contact
socket.
Use
Basic Settings
Set the blower inclination angle before starting the device.
You can adjust the inclination angle by tipping the blower
casing with both hands.
Operation
To select the speed, please use the push-button switch on
the back:
• 0 off
• 1 slow
• 2 medium
• 3 fast
English
19