Slow_1, Jslow_1: Slow Mode Booting Switch/ Jumper - MSI X99A XPOWER GAMING TITANIUM Démarrage Rapide

To disable GAME BOOST:
1. Set the GAME BOOST knob to HW mode in BIOS Setup.
2. Power off the computer.
3. Rotate the GAME BOOST knob to 0 and then power on. The configuration
parameters will be returned to its default values.
Important
You can also control the GAME BOOST function in BIOS Setup or with MSI
y
COMMAND CENTER software.
In order to optimize performance and improve system stability, when you activate
y
the GAME BOOST function, please leave the settings in the BIOS > OC menu
unchanged.
The success of overclocking depends on the components of your computer.
y
We do not guarantee the GAME BOOST overclocking range or the damages/risks
y
caused by overclocking behavior.
MSI components are recommended for better compatibility when using GAME
y
BOOST function.

SLOW_1, JSLOW_1: Slow Mode Booting Switch/ Jumper

These switch and jumper are used for LN2 cooling solution, that provides the extreme
overclocking conditions, to boot at a stable processor frequency and to prevent the
system from crashing. You can use either switch or jumper to enable the Slow Mode.
Enabled
(Please enable this function during BIOS POST.)
Normal
(Default)
Important
Users will try extreme low temperature overclocking at their own risks. The
y
overclocking results will vary according to the CPU version.
Please don' t switch to Enabled when power-off or the system will be un-bootable.
y
White LED indicates that the Slow Mode is
enabled
Enabled
(Please enable this function during BIOS
POST.)
Normal
(Default)
Overview of Components
29