MSI X99A XPOWER GAMING TITANIUM Démarrage Rapide page 64

fPCH Over Current Protection [Auto]
Sets the current limit for PCH over-current protection.
[Auto]
[Enhanced]
fPCH Switching Frequency [Auto]
Sets the PWM working speed to stabilize PCH voltage and minimize ripple range. If
set to Auto, BIOS will configure this setting automatically.
fPCH VRM Over Temperature Protection [Auto]
Sets the temperature limit on PCH VRM for over-temperature protection. The PCH
frequency may be throttled when PCH VRM over the specified temperature. If set to
Auto, BIOS will configure this settings.
SVID Communication [Auto]*
f
Enables or disables SVID (Serial Voltage Identification) support.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
VCCIN Voltage [Auto]
f
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
CPU Voltages control [Auto]
f
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
DRAM Voltages control [Auto]
f
These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.
PCH Voltages control [Auto]
f
These options allows you to set the voltages related to PCH. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
CPU Memory Changed Detect [Enabled]*
f
Enables or disables the system to issue a warning message during boot when the CPU
or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than needs to
load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
CPU Specifications
f
Press Enter to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.
54
BIOS Setup
This setting will be configured automatically by BIOS.
Extends the limitation of PCH over-current protection.