Focus SIGMAFOCUS Mode D'emploi page 8

B - Assembly instructions
It is essential to comply with all local and national regulations, as well as EC stan-
dards, when installing the Sigmafocus barbecue.
The wall where the barbecue is to be attached must be vertical, sturdy and must not
contain any combustible materials.
The ø 750 mm round wall plate is fixed to the wall using two screws (with plugs)
suited to the construction material of the wall. The screws must be aligned horizon-
tally with each other.
Diagram 2 shows the average height at which to attach the barbecue to the wall. It
is essential to ensure that the ground below the barbecue (over a minimum surface
area of 2 square metres) is clear of materials or objects that are combustible or
could be damaged by heat.
A folding slotted rack can be lifted and locked into place to hold the handle of the
grill at the desired height.
- 7 -