Installation - GE Quirky TAPT Guide De L'utilisateur

12
R-INS-TAPT-WH01.indd 12-13

INSTALLATION

Tapt should be
installed by a qualified
electrician and used
in accordance with
appropriate electrical
codes and regulations.
This is a single pole switch
and neutral connection
is required. Not intended
for replacement of
3-way switches.
1 Turn OFF power at
the circuit breaker that
controls the light switch.
It is recommended to use
a circuit tester to make
sure the circuit is off.
2 Remove existing
switch faceplate.
3 Remove the switch
mounting screws.
2014/10/23 下午 02:26:41
13