Reinigung Und Wartung - ulsonix AIRCLEAN 10G Manuel D'utilisation

Masquer les pouces Voir aussi pour AIRCLEAN 10G:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
DE
AIRCLEAN 20G-ECO | AIRCLEAN 7G-ECO | AIRCLEAN 7G-WL | AIRCLEAN 10G-WL
Mit dem Drehknopf können Sie die gewünschte Ozonisierungszeit einstellen. Im Modus „HOLD" arbeitet
das Gerät auf Dauer und ohne Pausen.
IX REINIGUNG UND WARTUNG
Vor dem Reinigen ist das Gerät vom Stromkreislauf zu trennen! Um das Gerät sauber zu halten, ist es
mit einem sanften, trockenen Tuch zu reinigen. Man darf weder Bürsten noch andere Reinigungsgeräte
verwenden, die zur Entstehung von Rissen/zur Beschädigung des Geräts führen können. Man muss vermeiden,
dass das Wasser durch Belüftungsöffnungen am Gehäuse in das Innere gelangt. Der Luftfilter muss regelmäßig
gereinigt werden (absaugen).
X TRANSPORT UND LAGERUNG
Beim Transport sollte die Maschine vor Schütteln und Stürzen geschützt werden. Lagern Sie sie in einer gut
durchlüfteten Umgebung mit trockener Luft und ohne korrosive Gase.
XI REGELMÄSSIGE PRÜFUNG DES GERÄTES
Prüfen Sie regelmäßig, ob Elemente des Gerätes Beschädigungen aufweisen. Sollte dies der Fall sein, darf
das Gerät nicht mehr benutzt werden. Wenden Sie sich umgehend an Ihren Verkäufer um Nachbesserungen
vorzunehmen.
Was tun im Problemfall?
Kontaktieren Sie Ihren Verkäufer und bereiten Sie folgende Angaben vor:
Rechnungs – und Seriennummer (letztere finden Sie auf dem Typenschild)
ggf. ein Foto des defekten Teils
Ihr Servicemitarbeiter kann besser eingrenzen worin das Problem besteht, wenn Sie es so präzise wie
möglich beschreiben. Je detaillierter Ihre Angaben sind, umso schneller kann Ihnen geholfen werden.
ACHTUNG: Öffnen Sie die Maschine niemals ohne Rücksprache mit dem Kundenservice. Dies kann Ihren
Gewährleistungsanspruch beeinträchtigen!
8
05.11.2018
U S E R M A N U A L
PRODUCT NAME:
AIR PURIFIER
MODEL:
AIRCLEAN 10G I AIRCLEAN 7G | AIRCLEAN 20G-ECO |
AIRCLEAN 20G | AIRCLEAN 15G | AIRCLEAN 7G-ECO | AIRCLEAN 5G-WL
AIRCLEAN 7G-WL | AIRCLEAN 10G-WL
MANUFACTURER NAME:
EXPONDO POLSKA SP. Z O.O. SP. K.
MANUFACTURER ADDRESS:
UL. NOWY KISIELIN-INNOWACYJNA 7, 66-002 ZIELONA GÓRA
SYMBOLS
The operation manual must be carefully read.
Never dispose of electrical equipment together with household waste.
This machine conforms to CE declarations.
Attention! Harmful fumes, danger of poisoning.
Drawings in this manual are for illustration purposes only and in some details may differ from the
PLEASE
actual product. The original operation manual is in German. Other language versions are translations
NOTE!
from German.
I SAFETY INSTRUCTIONS
1.
Before using the product, the manual must be carefully read. Please observe the safety guidelines
cautiously.
2. The product must be operated in accordance with the purpose specified in the manual.
3.
The product can be operated only by employees after the training has been completed successfully,
including health training and safety and fire protection guidelines.
4.
The product can be operated in a dry environment; do not expose it to moisture (i.e. water, snow, fog,
etc.)
5.
In case of damage or malfunction of the product, it must be switched off. Such situation must be
immediately reported to the entitled person.
6.
Please contact the manufacturer's service in case of any doubts regarding proper work of the product.
7.
The product can be repaired only by the manufacturer's service. Do not make repairs by yourself!
8. In case of fire, use only dry powder extinguishers or snow extinguishers (CO2) to extinguish the
energized product
9.
The product/machine/tool cannot be used in an explosive atmosphere.
10. Ensure that the power source to be utilized conforms to the power requirements specified on the
product nameplate.
11. Disconnect the product from power source when it is not in use.
II PRECAUTIONS ON USING THE DEVICE
1.
Persons with impaired sense of smell must not use the device.
2.
Provide enough free space around the device before turning it on. Do not obstruct the ozone vent
holes.
3.
It is strictly forbidden to directly inhale ozone coming out of the outlet holes of the device. Inhalation
of high concentrations of ozone over a short period as well as inhalation of low concentrations of
ozone over a long period of time may cause serious risk to health or life!
4.
The room treated with ozone must be sealed (all external doors closed, gaps in windows, doors etc.
sealed), mechanical ventilation must be switched off and ventilation grating must be covered. If possible,
internal ventilation should be running in order to facilitate the air flow in the room treated with ozone.
Open all internal doors in the room treated with ozone (such as bathroom, cabinet etc.).
05.11.2018
9
EN
|
POLAND, EU

Publicité

Table des Matières
loading

Table des Matières