Adjusting The Temperature - Imetec F7503 Mode D'emploi

EN
changes while using the straightener. The activation of
the button lock is signalled by the LED (4) going on; the
lock can be deactivated by pressing the
once again.
• The LED display (3) flashes until the plates reach the set
temperature.
Once the temperature is reached, the LED display (3)
remains on.
• Take a thin lock of hair, which is the same width of the
plate and not too voluminous, and place it between the
two plates.
• Keep the lock of hair taut with one hand and slide the plate
closed with the other hand, from the roots down to the
ends.
• Once the hair is styled, switch the appliance off by keeping
the button (8) pressed and disconnect the straightener
from the socket.
Note: steam may appear while straightening; this is
excess humidity in the hair that evaporates.

ADJUSTING THE TEMPERATURE

The hair straightener has an electronic temperature
adjustment system. This allows the plate temperature to be
adjusted according to the type of hair and the desired style.
150-160°C: recommended for thin hair
170-190°C: recommended for medium hair
200-230°C: recommended for thick hair
It is recommended to start styling by setting the lowest
temperature and gradually increasing it according to the
desired style.
14
button (8) twice