part, the more intense the fragrance will become. While the device is in ope-
ration, the LED light at the front (6) will shine down on the surface underneath
it, creating a soft glow.
4. On the back of the bottom part next to the connection for the USB cable (3),
you will find the status display for the battery (9):
• Normal operation with fully charged battery: LED is not illuminated
• Battery level 10 % or lower: LED flashes
• Battery is charging: LED is illuminated constantly
When the device is fully charged, the LED will go out. You can now disconnect
the USB cable and use the device in battery mode (for up to 30 hours).
Note: There are 6 different fragrance types to choose from in the fragrance glo-
be range: White Amber, Orange Bergamot, Red Jasmine, Blue Rosewood, Black
Orchid, Yellow Vanilla. You can buy the fragrance globes from the same place
you bought your Tina.
Cleaning
Before maintenance and after every use, switch the device off and pull the net-
work adapter out of the socket.
Careful: Never immerse the device in water (danger of short circuit).
• Regularly as required: To clean the outside, rub with a damp cloth and then
dry thoroughly.
• Regularly as required: Cleaning the inside: Take the fragrance globe out of the
device and place it on a surface that is not sensitive to fragrances. Put a drop