Dip-Switch Functions - KEY 900SC-C Manuel D'emploi

DIP-SWITCH FUNCTIONS

STEP/STEP OR OPENING FUNCTION
1 PP AP
This function is used to switch standard Step/Step functions (open - stop - close) to
open only.
PAUSE WHEN OPENING PHOTOCELL FUNCTION
2 FT AP
Select this function to change standard photocell functions. When opening, the door
stops when the photocell beam is interrupted. The door resumes opening when the
photocell beam is freed. When closing, the door stops when the photocell beam is
inte4rrupted. When the photocell beam is freed, the door reverses the manoeuvre
and opens.
AUTOMATIC CLOSE BYPASS FUNCTION
3 ES CA
Select this function to bypass automatic closing. After opening, the door does not
pause for the set time but stops awaiting the close signal.
SAVE FUNCTION
4 MEMO
Select this function to open carriage travel memory. See the chapter on
programming the travel
18