Assembly; Control Unit 900Ct-24Ssc - KEY 900SC-C Manuel D'emploi

ASSEMBLY

Observing the overall dimensions and alignment between the pinion and rack, secure the 900SC-C reduction
gear with means suited to support the strain.
Adjust chain tension using the slots made on the support brackets on the motor counter-base (fig.1). Unroll
the sheath with the metallic cord along the wall (fig.2), they are long enough to reach heights up to 6 meters
and should be shortened for shorter heights.
Fasten the metallic plate for ground release on the wall.

CONTROL UNIT 900CT-24SSC

FUSE 6,3A
-
+
1-2
Flasher
3
Phototest
4-5
24V service power
6
Shared
7
Step/Step
8
Photocells
9
Stop
10
Shared
11-12
2nd ch. output
13-14
Antenna
Fig. 1
+
PP
1 2 3 4 5 6
+
T1 T2
ON
OFF
P1
7 8 9 10 11 12 13 14
16
Fig. 2
LD 1
LD 2
LD 3