Klarstein 10031667 Mode D'emploi page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CAUTION
Risk of injury! Never use your finger or an object to push ingredients down the feed tube while
the appliance is running. Only the pusher is to be used for this purpose.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• Never let the appliance run unattended.
• Switch the appliance off before detaching and install any accessory.
• Wait until moving parts have stopped running before you remove the parts of the appliance.
• Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Use only a moist cloth
to clean the motor unit.
• Do not attempt to grind bones, nuts or other hard items.
• Never reach into the cutter housing. Always use the pusher.
• Unplug the appliance immediately after use.
• Never operation the appliance continuously for more than 3 minutes at 600W.
• Appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
• Children shall not play with the appliance.
• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassem-
bling or cleaning.
• Do not misuse the product. It may cause injury if misuse.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that
move in use.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
Hints on Thermostat System
This appliance is equipped with a thermostat system. This system will automatically cut off the power supply
to the appliance in case of overheating. If your appliance suddenly stops running:
1. Pull the mains plug out of the socket.
2. Let the appliance cool down for 60 minutes.
3. Put the mains plug in the socket.
4. Press the switch button to turn off the appliance.
5. Press the circuit breaker button (H1) at the bottom of the appliance to turn on the appliance.
6. Switch the appliance on again.
Please contact you dealer of an authorized service center if the thermostat system is activated too often.
If you plug in, the indicator light will be on.
IMPORTANT: In order to avoid a hazardous situation, this appliance must never be connected to a timer switch.
15

Publicité

Table des Matières
loading

Table des Matières