SHUFFLE AND REPEAT
Note that this section is valid for audio-CDs only. Repeat and Shuffle
cannot be set at the same time.
REPEAT
Press the
button on the remote control to cycle throught the
RPT
repeat options.'Track' or 'Disc' (i.e. all) repeat are available.
When a track repeat is selected, the loop symbol on the front panel
display is illuminated and the current track is repeated. If a disc repeat is
selected, the loop symbol and 'ALL' are illuminated and the entire disc
is repeated.
To cancel repeat, press the
RPT
front panel display are no longer illuminated.
SHUFFLE
Press the
button on the remote control to activate shuffle play.
P MODE
The 'RAND' (random play) indicator shows on the display, and the
tracks are played in random order.
To cancel random play, press the
RESTRICTIONS FOR CD-ROMS
The following is a list of restrictions that are imposed by the DVD
player on CD-ROMs and on MP3/WMA files.
Fast forward and fast rewind do not work with MP3 or WMA
playback.
Skipping forward past the end of a directory with CD-ROMs
causes playback to continue from the next directory containing
valid files. Skip-back can be performed only as far as the beginning
of the current directory.
Directory trees may be up to 10 directories deep.
Only sample rates of 44.1kHz and 48kHz are supported.
For MP3 playback, the following constant bit rates are supported:
32, 64, 80, 96, 112, 128, 160, 192, 256 and 320 kilobits per second.
Variable bitrate (VBR) between 96kb/s and 320kb/s is also
supported.
For WMA playback, the following constant bit rates are
supported: 48, 64, 80, 96, 128, 160, and 192 kilobits per second.
CD-ROM discs may contain files other than MP3, WMA or
JPEGs, but these will not be displayed on the screen.
Because of differences in the many MP3 and WMA encoders available,
we recommend that you conduct a test recording before transferring
large numbers of files to CD-R or CD-RW for subsequent playback
on the DV27A.
button until the Repeat symbols on the
button for a second time.
P MODE
20