Trim Setup; Access Setting; Completing The Setup - Arcam FMJ DV27A Mode D'emploi

TRIM SETUP

Trims 6/7
Test Noise
Front Left
Front Right
Centre
Surround Left
Surround Right
Subwoofer
Stereo+Sub
The relative sensitivity (volume) of different speakers can lead to some
speakers sounding disproportionately loud or quiet, relative to others
in the system.The trims setting of your DV27A can help to address this
inbalance.
TEST NOISE
Setting this item to 'On' causes pink noise to be generated from the
speaker indicated by the on-screen highlight.The noise is at the volume
indicated by the slider for the speaker. Setting this to 'On' may be useful
in ensuring that the relative volume for each speaker is the same.
Note that this setting is set automatically to 'Off ' on exit from this
menu page.
TRIMS
Trims for all the speakers can be set using the associated sliders.These
settings are useful if the speakers have different sensitivities (and so
have different volumes for the same input levels).
SUBWOOFER/STEREO+SUB TRIMS
Both the 'Subwoofer' and the 'Stereo+Sub' trims control the subwoofer
trim setting.'Subwoofer' is the trim used when multi-channel material is
being played; 'Stereo+Sub' is the subwoofer trim used with 2-channel
material.

ACCESS SETTING

Access 7/7
Password
Rating
PASSWORD
The password setting works in conjunction with the rating setting (the
next menu item), to provide a means of limiting content playback by
children (parental control).
You will see there are four dashes and a padlock symbol. Normally
the padlock symbol will be open and this means the parental control
is unlocked. Under this condition the rating setting may be freely
changed.
To lock the parental control, choose a suitable four digit number.
Don't forget your password as you will need to know it to unlock the
Off
0dB
0dB
0dB
0dB
0dB
0dB
0dB
– – – –
View all films
player. Highlight 'Password' and enter your four digit number using the
numerical keys on the handset.
When all four digits have been entered, press
player is now locked and you will not be able to change the rating
setting.
To unlock the parental control, highlight 'Password' and enter your four
digit number, followed by
OK
NOTE: You can change the password any time you lock the
player.
RATING
The rating setting is used in conjunction with the password to restrict
the content of DVD titles that may be played.To change this setting the
parental control must be unlocked.
The term 'Parental level' refers to a standard defined for DVDs. DVD
movies have a parental level between 1 and 8. Note that this only applies
to DVD video discs that have the parental level correctly implemented.
Some DVD video titles do not respond to parental control settings, and
Video CDs have no mechanism for parental control.
View All Titles of all parental levels will be played
No Adult
Only material of parental level 4 or less may be played.This
corresponds to the MPAA (Motion Picture Association of
America) rating of PG-13
Kids Only Only material of parental level 1 may be played.This
corresponds to MPAA rating G.
Once the rating level has been set, DVD titles with parental level higher
than the setting will not play. Sometimes DVD video titles may be
produced that have the parental level set for specific scenes, so a disc
will play but skip or substitute certain scenes.

COMPLETING THE SETUP

Complete the setup procedure by pressing
control.This saves all the data and closes the setup menu.You can press
at any time while in a menu to quit from it.
SETUP
To return to the setup menu at any time, ensure that there is no disc
playing and press the
SETUP
11
on the handset.The
OK
.
on the remote
SETUP
button.