Table Des Matières; Need Help; Register Your Product; Warranty And Fcc/Ic Statements - Ingersoll Rand Schlage BE469 Mode D'emploi

coNTeNTs
Warranty and FCC/IC Statements ............. 3
Lock Setup ............................................... 3
Lock Parts ................................................ 4
Replacing the Batteries ............................ 4
Locking and Unlocking ............................. 5
Locking from the Outside .................... 5
Locking from the Inside ....................... 5
Unlocking from the Outside................. 5
Unlocking from the Inside ................... 5
Cleaning the Lock .................................... 5
Programming the Touchscreen ................. 6
Tips for Successful Programming ......... 6
Programming Descriptions ................... 6
Programming Procedures ..................... 7
Please call customer support before returning the product to the store.
Visit our web site for videos, FAQs and more: answers.schlage.com
Document your purchase and register your warranty at RegisterMySchlage.com, or use the

WaRRaNTY aND Fcc/Ic sTaTemeNTs

lifetime limited mechanical and Finish
Warranty and 1-Year limited electronics
Warranty
Subject to the terms and conditions of the warranty, Schlage
extends a lifetime limited mechanical and finish warranty
and a one-year limited electronics warranty to the original
consumer user ("Original User") of our Schlage brand product
("Product") against defects in material and workmanship, as
long as the Original User occupies the residential premises
upon which the Product was originally installed. See answers.
schlage.com for specific warranty details and limitations, or
contact Schlage Customer Service at (888) 805-9837 in the
U.S. and Canada or (800) 506-7866 in Mexico for assistance.
2

NeeD HelP?

Toll-Free Calling From:

ReGIsTeR YoUR PRoDUcT

included registration card.
Programming the Alarm ........................... 8
Powering the Alarm ............................. 8
Alarm Setting Descriptions .................. 8
Changing the Alarm Mode ................... 9
Adjusting the Sensitivity Level ............. 9
My Codes ............................................... 10
Best Practices .................................... 10
Default Codes Locations .................... 10
Factory Default Reset ............................. 12
Emergency Key Override ........................ 12
Z-Wave ................................................... 13
Troubleshooting ..................................... 14
U.S.A.: (888) 805-9837
Canada: (800) 997-4734
Mexico: 018005067866
Fcc Interference statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation