Before First Use
• Remove all packaging material and check whether the
appliance is complete.
• Fully unwind the power cord (9) and make sure that the
power cord (9) is clamped into the cable guide (10) (rear
side).
• Place the appliance on an even and heat resistant surface.
Do not place it on top of a metal surface.
• Connect the appliance to a properly installed wall socket
and boil 4-5 kettles of water using fresh water with each
boiling cycle. Do not use this water but pour it away.
Warning: Plastic bags are a danger to toddlers and
babies, therefore keep them away to avoid suffocation.
Operation
Your appliance is fitted (inside the spout) with a removable
scale filter that prevents scale particles ending up in your
beverage.
1. Open the lid (4) by pressing onto the lid opening button (5).
Hold the kettle (1) in an upright position to ill it with water.
Make sure to ill in the MIN amount of water (0.5L) to avoid
overheating.
Info: The kettle (1) can also be illed with water when the lid is
closed by illing it through the spout (3).
2. Close the lid (4) and make sure it is properly closed.
3. Place the kettle (1) onto the base (8) and make sure it properly
its onto the contact unit.
4. Connect it to the mains and switch on the water kettle by
pressing the On/Off button (7), which is located at the lower
end of the handle (6). The indicator light lights up.
5. As soon as the water boils the appliance switches off
automatically provided that you have thoroughly closed the
lid (4). Otherwise boiling water could spill. The indicator light
switches off as well.
16