Full Two-Year Home Use Warranty; Free Warning Label Replacement - Black & Decker DR250 Mode D'emploi

638911-00 02 DR drills

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge in
either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailer's policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check with the retailer for their
specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may be
required.Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state or province to province.
Should you have any questions, contact the manager of your nearest Black & Decker
Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
MAXIMUM RECOMMENDED CAPACITIES
Cat. # Type
DR250 3/8 in. Drill 3/8 in.(9.5mm) Twist Bit
DR320 3/8 in. Drill 3/8 in.(9.5mm) Twist Bit
DR330 3/8 in. Drill 3/8 in.(9.5mm) Twist Bit
DR550 1/2 in. Drill 1/2 in.(12.7mm) Twist Bit 1-1/2 in. (38.1mm)
DR650 1/2 in. 1/2 in.(12.7mm) Twist Bit 1-1/2 in. (38.1mm)
Hammer Drill
Black & Decker (U.S.)
Inc.,
701 E. Joppa Rd.
Towson, MD 21286
U.S.A.
3/20/08 10:20 AM Page 12
Steel Soft Wood
1-1/4 in.(31.7mm)
1-1/4 in.(31.7mm)
1-1/4 in.(31.7mm)
12
Hard Wood Masonry
1 in.(25.4mm) N/A
1 in.(25.4mm) N/A
1 in.(25.4mm) N/A
1-1/4 in.(31.7mm) N/A
1-1/4in.(31.7mm) 1/2 in.
(12.7mm)
See 'Tools-
Electric'
– Yellow Pages –
for Service &
Sales