System Requirements; Installation Instructions - U.S.Robotics USR5455 Guide D'installation Rapide

English
Back
Item
LAN
Reset
9VDC

System Requirements

! A computer with an Ethernet adapter installed
! A router or other networking device with a DHCP server
! An Ethernet-based cable or DSL modem or other WAN connection for
Internet access
! Safari users: Safari 1.2 or later
All other users: An HTML 4.01-compliant Web browser with JavaScript ena-
bled

Installation Instructions

You must have administrator rights on your computer in order to install this
access point.
Step One: Connect the Access Point
1. Look at the label on the bottom of the access point and note its LAN MAC
address. You may need it to distinguish the access point from other devices
on your network.
LAN MAC Address: _________________________
4
LAN
Function
Connects an antenna to the access point.
Connects the access point to a networking device.
Reboots your access point or restores your access
point to its factory default settings.
! To reboot your access point without changing
your current settings, press and hold the Reset
button for 1 second.
! To restore your access point to the factory
default settings, press and hold the Reset button
for at least 10 seconds.
Connects the power adapter to your access point.
9VDC
Reset