Application Technology; Removal Of Lower Spray Arm From Profiline Dishwasher; Fitting The Apfd 211 Adapter - Miele APFD 210 Mode D'emploi

Removal of lower spray arm
from ProfiLine dishwasher
The lower spray arm must be removed
before the APFD 211 adapter can be fit-
ted in the wash cabinet of the ProfiLine
dishwasher.
 Switch off the dishwasher.
Removing the lower spray arm
 Remove the lower basket.
 Rotate the screw thread of the lower
spray arm anti-clockwise  and pull
the spray arm and the screw thread
up and out of the wash cabinet .
The lower spray arm  is permanently
attached to the screw thread . The
adapter  can only be fitted with a per-
manently attached screw thread .
Fitting the APFD 211 adapter
 Fit the adapter with the screw
thread  and ensure that the filter
combination lies flat in the base of
the wash cabinet.
en - Application technology
 Rotate the screw thread of the ad-
apter clockwise  until the arrow in
the viewing window points to the lock
symbol .
 Check that the adapter connection is
secure.

Damage due to soiling entering
the circulation system.
The adapter is used to secure the fil-
ter combination. Without filters,
coarse soiling can enter the circula-
tion system and cause a blockage.
Do not run a wash programme
without the adapter or without the fil-
ters.
21