Using Your Induction Hob - Candy CI642CWTT Mode D'emploi

please place the pan in the centre of the cooking zone.
The base diameter of induction cookware
Cooking zone
1, 2, 3, 4 (180mm)
The above may vary according to the quality of the pan used.

Using your Induction Hob

To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
" – " or " – – ", indicating that the induction hob has entered
the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control, and
a indicator next to the key will flash.
4. Set a power level by touching the "-" or "+" control.
a. If you don't select a heat zone within 1 minute, the induction
hob will automatically switch off. You will need to start again
at step 1.
b. You can modify the heat setting at any time during cooking.
Minimum (mm)
120
EN-11