Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
begin the automatic brewing and the clock has returned to the
time of day.
3.
Set up the taste strength by pressing the strength button. The
default setting of coffeemaker is for regular strength, indicated by
icon
. You can choose bold strength by pressing strength
button. The icon "
illuminate to show it is under bold strength mode.
4.
Within 5 seconds of no operation, the icon "PROG" will light
off, exiting the setting up process.
5.
After setting up, press Prog/Auto button to start auto brewing .
The icon "AUTO" light and Prog/Auto button indicator will
illuminate, and other buttons will lose operation function.
6.
When brewing is finished, the icon "AUTO" will light off.
Note: The auto brew can be cancelled at any time by pressing
Prog/Auto button again or Brew/stop button.
Cleaning the coffeemaker and changing the charcoal filter
Mineral deposits from water can clog your coffeemaker. We suggest to
change the filter once a month.
Change the filter
1.
Open the cover of reservoir, and pull out the water filter.
2.
Open the water filter, pull out the old charcoal, discard and
re place with a new one.
10
" light and strength button indicator will
Publicité
Table des Matières
