Turning On And Off; Heater And Fan; Oscillation; Setting The Timer - Philips AMF220 Mode D'emploi

Turning on and off

Note:
• Plug the appliance into the power outlet; do not use a power strip.
• If the appliance is running in heating mode when you turn it off, it continues working for a few seconds to exhaust
the remaining heat�
1
Press to switch on the appliance�
2 The display panel lights up, and appliance shows the PM2�5 level and temperature
(fig )�
k
3 Press to switch off the appliance�

Heater and fan

Heater ( )
Fan ( )

Oscillation

Press the button, the appliance can oscillate at three angles: 60°, 120° and 350°�

Setting the timer

Press the button repeatedly to set operating hours of the appliance� The timer is available
from 1 to 7 hours�
1 hour 2 hours
To deactivate the timer, press the

Setting the child lock

1
Press and hold the
» appears on the screen�
» All the other buttons are unresponsive except on/off�
2
Press and hold the
disappears�
»
4 EN
Low Medium
Low Medium
3 hours 4 hours
button repeatedly until all the hour indicators are off�
button for 3 seconds to activate the child lock (fig
button for 3 seconds to deactivate child lock�
Light strip
High
High
5 hours 6 hours
Red
Blue
7 hours
)�
l