Vicon AURORA 2000 Guide Rapide page 7

Main Display Monitors
Monitors used to
freeze video, zoom,
display menus and
multi-picture formats
as well as other
digital functions.
1
7 5
8 6
Cable supplied by
installer or purchased
in AurorA2000 prepacs.
A2K A2K A2K A2K A2K
Video Video Video Video Video
1/9 2/10 3/11 4/12 5/13
Terminate with 75 ohms at the destination
devices. Refer to the labels for outputs 1-8.
There are two labels on each cable. Use the
"A2K Video" label instead of the "Video" label.
Quick Guide
IN
3 1
VGA
4 2
Cable
supplied
by installer.
Spot Monitor
A2K A2K A2K
Video Video Video
Spot monitor used to
6/14 7/15 8/16
view images from any
camera, acknowledge
alarms or display
menus when simplex
unit is in record mode.
Visit our home page at: http://www.vicon-cctv.com
Playback VCR
VIDEO IN
Cable supplied
by installer.
MAIN DISPLAY
VCR
CVBS
IN
OUT
SPOT MON
VCRs can be connected to either the BNC or
DIN connectors.
If connecting to DIN, use cable supplied with
IN
VCR, or fabricate an RG-179 coaxial cable
(50'/15m max. length) using the table below.
Pin No.
For complete instructions, see Instruction Manual XX040.
Connections
Record VCR
VIDEO OUT VIDEO IN VIDEO OUT
Note: You may also use
a single VCR to either
playback or record.
Composite
Video
Y/C Video
Signal Name
1 Ground
2 Ground
Y: luminance,
3
1 V p-p, 75 ohms
VCR S-VHS (Y/C)
C; chrominance,
4
(View from Wiring Side)
0.3 V p-p burst, 75 ohms
3 2
4
1
Connections
3