Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
What is the basic function of the AurorA2000 multiplexer?
The AurorA2000 can display up to 16 cameras on the main display monitors in up to 16 small windows. It can also switch very quickly
between these cameras so that a VCR can record full screen images of the video, one after another.
How do I access the AurorA2000 help system?
Simply press
to access information on the currently active keys and the available menu choices. Press
HELP
What is AurorANet?
AurorANet is a proprietary 2-wire RS-485 protocol used to communicate between Vicon devices such as AurorA2000 multiplexers, AurorAcorD digital
recorders, System Consoles and V800MIU-3A Multi-Output Interface Devices. Refer to AurorANet Quick Guide 8009-8040-40-00 and Instruction
Manual XX040 for more information about AurorANet.
Why are there two main display connectors?
There are two main display connectors so that you can use a VGA monitor for best picture quality or you may use a standard CCTV composite
monitor. Optimize your display using the setting in the Easy Setup Menus.
What is the purpose of the spot monitor?
The spot monitor is used to display one camera at a time in full screen format. You may display the time, date and titles on the spot monitor.
What is mechanical pan/tilt/zoom (mptz)?
Mechanical pan/tilt/zoom allows you to control receivers from your AurorA2000 front panel after selecting the receiver's camera on the main
display or spot monitors.
Do I need to terminate video inputs?
No. The AurorA2000 terminates each video input with 75 ohms.
What is the purpose of the looping connectors?
The two looping connectors are used to loop out the video from cameras 1-8 on one connector and cameras 9-16 on the other connector. You
must terminate with 75 ohms at the devices that you are looping out to, but not at the AurorA2000 connectors.
What can I do with a PC keyboard connected to the AurorA2000?
This lets you use a wireless or standard PC AT keyboard to easily type camera and macro titles. You can also perform any function from the PC
keyboard that you can from the AurorA2000. Use the following tables.
AurorA2000 Key
PC Keyboard Key
1-9
10
11-16
Shift + 1-6
SPOT
MONITOR
RECORD
LIVE
PLAY
8
Quick Guide
Frequently Asked Questions
AurorA2000 Key
1-9
HELP
0
MENU
SETUP
ENTER
+
ZOOM
–
ZOOM
Visit our home page at: http://www.vicon-cctv.com
PC Keyboard Key
AurorA2000 Key
F1
F2
F3
F4
F5
F6
For complete instructions, see Instruction Manual XX040.
again to exit the help system.
HELP
PC Keyboard Key
MECH
F7
P/T ZOOM
F8
FREEZE
F9
DISPLAY
F10
ALARM
F11
SEQUENCE
F12
MACRO
Publicité
Table des Matières
