CONTINENTAL EDISON CECP1000B Guide D'utilisation page 13

OPERATION
1. Remove all packing material and any stickers.
2. Wipe the plate with a damp cloth or sponge to remove any dust.
Wipe the dust with a soft cloth or paper towels.
3. Select a suitable location where the unit is to be used, leaving
enough space between back of unit and wall to allow heat to flow
without damage to cabinets and walls.
4. Plug the unit into a suitable electrical outlet, Turn the thermostat
clockwise. The light lights up, the unit is heating up. If the
thermostat is on position Off, the plate will no longer heat up.
Before the first use, it is recommended to apply a little oil or
grease on the plate.
5. Important: The cooking plate will be very hot. Caution should be
taken to prevent the hands from contacting with the plate.
6. After use, unplug the unit from the electrical outlet and allow it to
cool to room temperature before cleaning.
7. Caution: Do not immerse the appliance into any liquid.
8. Before using the appliance, prepare the dough separately and
pour it into a suitable container. Pour the pre-prepared dough onto
the heating plate and, using the specific accessory, spread it
perfectly to cover the entire surface. Take care not to put too much
dough in order to avoid any smudge off the plate.
Note: For the best result, pour a small amount of oil on the heating
plate so that the pancakes can be easily removed from the plate.
When the surface of the pancake is no longer liquid, turn the pancake
completely using a spatula.
When cooking is finished, remove the pancake. It is then possible to
re-cook by repeating the operations described above. Otherwise, turn
off the unit by turning the thermostat to "0" and unplug the plug from
the area.