Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
STEP G
Install the handle (H) as shown.
Ensure that the door closes tight and opens smoothly, and there is a tight connection between the side
glass panel and the frame as well as the support bar. Adjust the roller if necessary.
Apply a clear silicone water sealant around the inside and the outside perimeter of any fixed shower
components (horizontally between bottom of fixed side glass panel and base, as well as vertically between
the wall, glass frames, and any side glass panel).
Allow 24 hours for silicone to dry.
Improper application of silicone sealant may cause your shower to leak.
C
H
SILICONE
C
B
SILICONE
SILICONE
14
Publicité
Chapitres
Table des Matières
