HOLL'S Barrel HL-ED1020R Manuel D'installation page 7

Read the assembly instructions carefully before starting.
Choice of location
Holl's saunas are designed solely for exterior installation.
Select a space:
• In a dry area, on a flat stable surface that can support the weight of your sauna.
• The height must be sufficient for you to reach the ceiling and carry out electrical connections and maintenance.
• Away from any source of water, flames or flammable materials.
Practical advice
• Note that sauna assembly requires 2 or 3 adults.
• Clearly identify each panel before you begin
• During assembly, position your sauna's mains cable so that it is easily accessible.
• Note that there are variations between the models.
•
IMPORTANT:
•
Please check the countersink and hole diameter of the drill holes to avoird damaging the wood.
•
The minimum room height required for installation is 2020 mm.
Tools needed
Phillips
Screwdriver
Pencil
2 Spanner
(19 mm)
Installation
Tape measure
Cutter
Electric
screwdriver
EN
Step ladder
Mallet
7