Muji MJ-EK5AEU Manuel De L'utilisateur page 8

How to Use (Continued)
4
. Turn on the power switch
The power turns off after the water boils.
Press the ON switch. The power light turns on.
Once the water boils, the power will turn off automatically.
(The power switch will return to its original position, and the
power indicator will turn off.)
Turn On
Light On
5
. Unplug the kettle
6
. Pour out hot water.
Check to be sure the lid is on tight.
Remove the kettle from the power base.
Flip the lock lever to pour out hot water.
Be sure
the lid is
closed
tightly.
7
. When finished
When finished, pour out any remaining water.
Water Boils
Light Off
To pour
Slide toward
When finished
Slide toward
<Boiling Time>
Boiling time varies according to
water volume, water temperature,
room temperature, etc.
<No Heat-Retention Function>
After boiling, water will eventually
return to room temperature.
Only boil as much water as you
plan on using.
<To Turn the Power Off when
Automatically
Boiling Water>
Turns Off
Move the power switch to the
OFF position.
7
Boiling Time (water at 23˚C/73.4°F)
• 500ml...
approximately 3 min. 30 secs.
WARNING
• Even when the lock lever is
closed, do not tip, shake, or
knock over the kettle. Hot water
may come out of the pour spout,
resulting in burns or other injury.
• Do not open the lid immediately
after boiling water. Doing so
may cause burns or other injury.
• Pour hot water carefully.
Pouring out a large amount of
hot water all at once may result
in burns or other injury.
Notice
• This electric kettle comes with
a safety switch to turn the
power off when it detects
steam. Steam may condensate
and drip from the bottom of the
kettle. This is not a
malfunction.
• The kettle and lid may become
hot after a while if hot water is
left inside. This is not a
malfunction.
Attention
• Do not leave hot water in the
kettle. Doing so may result in
discoloration, corrosion, or odor.
• Clean the kettle after using.
• Maintain and clean the kettle on
a regular basis.