Muji MJ-EK5AEU Manuel De L'utilisateur page 5

Usage and Requests
• Use the cord holder to adjust the length of the power cord. Place the cord in the
cord outlet.
Bottom of Power Base
Cord Holder
• This kettle does not have a heat-retention function. Only boil as much water as
you intend to use.
The design of this kettle requires space between the underside of the lid and the surface of the water. Filling
past the water fill line is dangerous, as it may cause hot water to spill out of the pour spout and steam spout.
• Pour out remaining water
Leaving water inside the kettle may result in discoloration or corrosion.
• Regularly clean the kettle (water stains, etc.).
See P8 Care and Maintenance.
Leaving stains will result in loud noises during boiling and pour spout blockage.
• Set the kettle properly in the power base.
Connection
<Clanking Sound>
You may hear a clanking sound when you move the kettle. The sound comes from the valves in the
kettle. It is not a malfunction.
Cord Outlet
Fill Line
5 0 0 m l M A X
(500 ml)
3 0 0 m l
1 0 0 m l
If the kettle is not seated properly in the power base,
the switch will not turn ON.
Attention
If the kettle does not work when properly seated,
Properly
stop using the kettle, unplug the unit, and contact
seated
the store it was purchased from.
4
WARNING
Use the cord outlet to
prevent the kettle from
tipping over and keep
the cord from damage
that could cause fire
or electrocution.
WARNING
Do not fill past the fill line (water
lines are estimates).
Filling past the water line may
cause hot water to spill from the
top or base of the kettle, resulting
in burns or other injury.