Part Names And Functions - Muji MJ-EK5AEU Manuel De L'utilisateur

Part Names and Functions

• This product consists of a kettle and a power base.
The kettle will not function unless it is seated in the power base and the switch is turned ON.
• Dry-boiling the kettle (heating with no water) will cause the safety switch to function,
turning off the power.
WARNING
Do not touch steam directly. The kettle releases
steam as water boils. Steam may cause burns
or other injury.
Lock Lever
To Pour To Close
Power Indicator
(shines through kettle body)
Boiling: Light on.
Finished: Light off.
Kettle Bottom
Connection
Power Base Connection
Cord Outlet
Power Cord
Plug
Power Base Bottom
Cord Holder
Wrap the power cord for storage
Cord Outlet
Steam Spourt
Lid Release
Kettle
Power Cord
(1.4m/
55.12 inch)
<To Open>
Squeeze the lid release to open.
<To Close>
Lid
Line up the steam spout with the
handle and close until the lid clicks
into place.
Pour Spout
Handle
Only fill with water.
<Fill Line>
Safety Label
Power Base
Power Switch
Push to turn the kettle ON. The power switch
will automatically turn OFF after the water boils.
Attention
• This product is for boiling water.
Do not place anything other than water
inside this kettle.
• Always close the lid tightly when boiling water.
Set the lock lever to
5
Opening/Closing the Lid
②
①
Notches
Protrusions
Kettle
5 0 0 m l M A X
Fill Line
(500 ml)
3 0 0 m l
1 0 0 m l
WARNING
Do not fill past the fill line (water
lines are estimates).
Filling past the water line may
cause hot water to spill from the
top or base of the kettle, resulting
in burns or other injury.
Read and understand
.
①