General Information - PNI CT35 Manuel De L'utilisateur

Wireless smart thermostat PNI CT35 User Manual
WARNINGS
Because the product must be connected to a 230 VAC power supply and to a heating appliance,
installation should only be carried out by qualified personnel to avoid irreparable damage to the product and /
or the heaters that are connected , defects not covered by warranty.
We recommend that you have qualified personnel with experience in this field, for initial setup of the
equipment in order to understand correctly the technical terms and procedures detailed in this manual.
After installation and connecting, the product is easy to use both mobile unit and smartphone controll with
an intuitive and easy to configure interface.
To access / monitor / control the product remotely from your smartphone, it is necessary to have an
internet source (a 2.4 GHz Wifi Internet router is required) close to where thermostat is installed.

GENERAL INFORMATION

The smart thermostat PNI CT35 has been developed to provide customers extra day-to-day comfort in
their homes, in the office or other premises, offering the ability to monitor and turn on or off heating systems
either automatically scheduled for every day of week, either remotely, anytime and anywhere via the Internet
with dedicated app for Android or iOS Smartphone.
Mode of operation and communication:
Dedicated app name is TuyaSmart
and can be downloaded
either from the Googel Play /
App Store, either by scanning
with your smartphone the QR
code
Package content:
- Main unit with illuminated screen
- Receiver / relay command unit
- Wall / table mount accessories
- User manual
below:
9
EN