Troubleshooting - Snapper HD HT48K Guide D'utilisation

TROUBLESHOOTING

PROBLEM
Motor fails to
start when
switch trigger is
depressed.
Motor runs, but
cutting blades do
not move.
Hedge trimmer
smokes during
operation.
Motor hums,
blades do not
move.
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Machine is damaged.
Do not use the hedge
trimmer.
Machine is damaged.
Do not use the hedge
trimmer.
Debris or the like may
be jamming the blades.
SOLUTION
To secure the battery pack,
make sure the latch on the top
of the battery pack snaps into
place.
Charge the battery pack
according to the instructions
included with your model.
Call for technical service.
Call for technical service.
Remove the battery, then
clear debris blockage from the
blades.
16