Pulmic ANIMAL TRACK Mode D'emploi page 17

Machine assembly
1. Unboxing the machine
2. Place the carrying handle with the control valves in the chassis housings, (figure 1).
3. Connect the two tank hoses (absorption and return) to the regulating valve. To do this,
the pin must be removed and once inserted, replace it (figure 2 and 3)
Figure 1
4. Fit the right and left adjustable bar on the machine, (figure 4).
5. Attach the hose of each adjustable rod to the bottom of the control valves (left and right).
First you must remove the pin and once you have inserted the hose coupling you have to put
it back, (figures 5 and 6).
Figure 4
Figure 6
17 17
Figure 2
Figure 5
Return
Absorption
Figure 3