Reversing System
The forward and reverse operation is
powered by an electric actuator located
within the engine bay. This item requires no
servicing, but cables should be inspected
and greased according to the periodic
maintenance table.
WARNING.
reverse control from forward to reverse,
a delay in the actuator movement will be
observed.
MANUAL OVERRIDE OF
REVERSING SYSTEM
In the event of a reverse servo failure, there is a
manual override facility, which allows the tender
to be driven forwards. This operates by means
of a lockable pin which can be removed from
its normal operating position and secured in the
forward bracket, as illustrated.
Lifting the EvoJet
The Evojet may be lifted using the Single Point
Lift or Deck Lift Points (both optional). Please
refer to the documentation provided with your
lifting option for further details.
WARNING.
Always ensure the boat is lifted in a level
position.
Windscreen Care
The acrylic windscreen should be cleaned
often to preserve its attractive appearance.
NEVER use any cleaning product
containing ammonia, petrol, alcohol,
carbon tetracholride or acetone, which
26
When moving the throttle/
Risk of injury or death.
Above: Remove securing pin; manually pull
cable forward; secure in forward bracket.
WARNING.
Risk of injury or death.
No persons must be aboard the boat
during lifting.
will cause the screen to craze with
minute cracks. Use a speciality cleaning
product or a mild solution of detergent and
fresh water.