CARB AND EPA WARRANTY
•
Valves affecting distribution of flow.
•
Distribution manifold.
6. Catalyst or Thermal Reactor System
•
Catalytic converter.
•
Thermal reactor.
•
Exhaust manifold.
7. Particulate Controls
•
Traps, filters, precipitators, and any other device used to capture particulate
emissions.
8. Miscellaneous Items Used in Above Systems
•
Electronic controls.
•
Vacuum, temperature, and time sensitive valves and switches.
•
Hoses, belts, connectors, and assemblies.
E - Emission Warranty Parts List for Evap
1.
Fuel Tank
2.
Fuel Cap
3.
Fuel Lines (for liquid fuel and fuel vapors)
4.
Fuel Line Fittings
5.
Clamps*
6.
Pressure Relief Valves*
7.
Control Valves*
8.
Control Solenoids*
9.
Electronic Controls*
10. Vacuum Control Diaphragms*
11. Control Cables*
12. Control Linkages*
13. Purge Valves*
14. Gaskets*
15. Liquid/Vapor Separator
16. Carbon Canister
17. Canister Mounting Brackets
18. Carburetor Purge Port Connector
*Note: As they relate to the evaporative emission control system.
Rato will furnish with each new small off-road engine/equipment written instructions for
the maintenance and use of the engine/equipment by the owner.
33