Operation; Using Electric Power; Ac Application - Patron GH-9000B Mode D'emploi

Using Electric Power

Risk of electrocution.
Make sure that the appliance is switched off before
connecting it to the generator.
• DO NOT move the generator while it is running.

AC Application

1. Make sure the voltage indicated on the voltmeter is at the normal level
(approx. 120V).
This generator is thoroughly tested and adjusted in the factory. If the
generator does not produce the specified voltage, consult your nearest
authorized service provider.
2. Turn off the switch(es) of the electrical applianc(es) before connecting
to the generator.
3. Insert the plug(s) of the electrical appliance(s) into the receptacle.
• Be sure that the total wattage of all connected appliances does
not exceed the rated output of the generator.
To take power out from the twistlock receptacle, insert
the plug into the receptacle, and turn it clockwise to the
lock position.
• DO NOT put foreign objects into the plug receptacle.
4. Turn on the switch of the appliance.
20

OPERATION

WARNING
NOTICE
WARNING