Wolf VW45G Guide D'utilisation Et D'entretien page 8

H OO D O P E R AT I ON
Control Panel
B L OW E R
To adjust blower speed, touch HIGH+, MEDIUM or LOW.
Touch again to turn the blower off.
To initiate boost mode, touch and hold HIGH+ for 3 sec-
onds. Boost increases airflow by approximately 20% more
than high, but is limited to 10 minutes. After 10 minutes, the
blower will automatically transition to the previous selected
speed.
D E LAY
The delay feature automatically turns the lights and blower
off after 10 minutes of operation.
F I LT ER
After approximately 100 hours of operation, the filter
indicator will signal the filters need to be cleaned. Refer to
filter removal and care recommendations on page 9.
For black hoods, 'FG' or 'FC' (recirculation application) will
illuminate on the control panel display. To reset the filter
indicator, touch and hold DELAY for 5 seconds until 'FF'
appears on the display.
For stainless | glass hoods, the filter LED will illuminate on
the control panel. To reset the filter indicator, touch FILTER
for 5 seconds.
|
8 Wolf Customer Care 800.222.7820
LI GH T
For black hoods, touch LIGHT for high or touch and hold for
2 seconds for low. Touch again to turn lights off.
For stainless | glass hoods, touch LIGHT—HIGH or LOW.
Touch again to turn lights off.
O N / O FF
Touch ON/OFF to turn the blower on low. Touch again to
turn the blower off.