Package Contents; Video Connections - UTC Fire & Security interlogix UVC-XP4DN-HR Guide De Démarrage Rapide

EN

Package contents

Check the package and contents for visible damage. If any
components are damaged or missing, do not attempt to use the unit;
contact the supplier immediately. If the unit is returned, it must be
shipped back in its original packaging.
Package contents:

Multilingual Quick Start Guide

CD with User Manual in several languages

Camera

C-mount adaptor
CAUTION: Use direct plug-in UL listed power supplies marked Class
2 or LPS (limited power source) of the required output rating as listed
on the unit.
Installation
This section provides information on how to install the camera.

Video connections

Figure 1: Making the video connections
1. Connect a coaxial cable terminated with BNC connectors between
the MON OUT connector of the camera and the video in connector
on a test or local monitor.
2. Connect a coaxial cable terminated with BNC connectors between
the VIDEO OUT connector of the camera and the video in
connector on a monitor, multiplexer, switcher, or other standard
video device.
Quick Start Guide 3 EN