Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting
The TASS speed sensor attaches to the static beam of the associated belt scale, or to a
structural cross member via a pivot and bracket assembly.
Do not allow the slope of the TASS arm to exceed 45° below the belt stringer line.
Note:
Ensure that the wheel is in contact with the belt at all times.
Location
Locate the TASS near the scale assembly to simplify wiring. The wheel should ride on the
return belt, either just before or just after a return belt idler.
7ML19985HL61
TASS Speed Sensor – INSTRUCTION MANUAL
TASS
Milltronics belt scale
Page 5
Publicité
Table des Matières
