Application Overview - Thinkcar THINKOBD 500 Mode D'emploi

EN

2.2 Application Overview

When the code reader boots up, the Home screen opens. This screen shows all applications
loaded on the unit. Following applications are preloaded into the code reader:
● Diagnostics: leads to OBDII screens for all 9 generic OBD system tests.
● IM Readiness:option allows to view a snapshot of the operations for the emission system on
OBDII/EOBD vehicles.
● Lookup: leads to screens for diagnostic trouble code lookup.
● Review Data: leads to screens for access to tested data files.
● Print : leads to screens for access to printing function
● Help: You will find the device OBD function and system instructions
● Setup:leads to screens for adjusting default settings to meet your own preference when using
the code reader.
● Info: leads to screen that shows information about the code reader.
Note: Not all function options of the protocol listed in this device are applicable to all vehicles. The
available options may vary depending on the year, model, and make of the vehicle tested. If this option
is not applicable to the vehicle under test, "X" will be displayed. When the barcode reader is connected
to the vehicle, it will automatically check the status of the I/M monitor and give a summary report on
the display, as shown in the figure below.
1.1.1 Select "Diagnosis", click "OK" to enter the system diagnosis, select the vehicle
type, and enter the diagnosis function list.
3