Dab / Dab+ Radio - Trevi DAB 7F94 R Mode D'emploi

radio station with the best signal received.
5. To store a radio station:
- Move to the frequency to be memorized, long press the key
PRESET (7); The memory number flashes on the display;
- Turn the knob (2) to select the number of
memory where you want to save the radio station.
- Press the SELECT button (9) to confirm.
- The device can memorize up to 10 stations.
6. To recall a stored radio station:
- Press the PRESET key (7) and use the knob (2) to
select the memory number to listen to;
- Press the SELECT button (19 to confirm;
7. To switch listening from STEREO to MONO and vice versa:
- Press the MENU button (5) and select AUDIO SETTING
using the knob (2);
- Press the SELECT button (9) to confirm;
- Use the knob (2) to select STEREO
ALLOWED or FORCED MONO;
- Press the SELECT button (9) to confirm.

DAB / DAB+ RADIO

Automatic scanning
1. Turn on the unit and start the radio mode.
2. Press the MODE button (3) to select the DAB radio mode (the message
"Switch to DAB" appears on the display).
3. Press the SCAN button (4) to start scanning the DAB stations. During the
scan, the display will show the progress bar and the number of stations
stored;
4. Turn the knob (2) to select the desired station.
Note:
- It may be necessary to wait a few seconds for the unit to tune to the
new channel.
- In DAB mode the date and time of the device are synchronized with those
of the station being listened to.