Polarlite 1552831 Mode D'emploi page 3

Operating instructions
Camping light with built-in power bank
Item no. 1552831
Intended use
This product is designed for use as a portable indoor and outdoor light. In addition, it can be
used as a portable energy storage system and to charge batteries in mobile devices such as
smartphones. It contains a built-in rechargeable battery, which can be charged via USB. The
product comes with an LED battery level indicator. The product is in the IP44 protection class.
This is guaranteed, if the caps over the USB ports are tightly closed.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Light
• 2x S-shaped hooks
• USB cable
• Storage pouch
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will not assume any liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, excessive moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which are not answered by these operating instructions,
contact our technical support service or other technical personnel.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
• Never leave the product unattended during use.
• Never expose the product to water or damp environments when one of the covers
for the USB charging ports is not in place.
• The battery housing warms up during use. Ensure that there is sufficient
ventilation. Do not cover the battery housing!
b) Electrical safety
• Never pour any liquids over electrical devices or place objects filled with liquid
next to the product. If liquids or objects do get into the interior of the product,
discontinue use and take the product to a repair centre.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the product to reach room temperature before connecting and using it. This may
take several hours.
c) Rechargeable battery
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of a rechargeable
battery may cause it to explode or catch fire!
• Never short-circuit the contacts on the rechargeable battery. Do not throw the
battery or the product into open flames. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The
product may become warm when the battery is charging.
Product overview
6
5
4
3
2
9
10
1
Operation
Check the battery level of the internal battery before each use. Fully charge the
internal battery before each use.
Ensure that the connection specifications for your mobile device comply with the
connection data for the product (see technical data). Always read the operating
instructions for your mobile device. Do not short-circuit the USB outputs. The USB
cable is not designed for data transfer. Some mobile device types can charge slowly
because the USB cable supplied is a charging cable only.
1 Thumbwheel (under the plastic cover)
2 USB micro port (under the plastic cover)
7
3 Fixed handle
4 USB-A port (under the plastic cover)
5 Adjustable handle
6 S-shaped hook
8
7 Rechargeable battery function button
8 LED with filter
9 LED battery level indicator
10 Light function button