Philips NORELCO 7000 Serie Mode D'emploi page 9

During the first phase of the cleaning program,
the shaver automatically switches on and off
several times and is put in different positions.
During the second phase of the cleaning program,
the shaver is placed in the drying position. It stays
in this position until the end of the program.The
cleaning light starts burning continuously.
After the cleaning program, the shaver
automatically returns to its starting position and
the charging program is started.The charging light
starts blinking.
If you press the start button or open the lever
B
during cleaning, the cleaning program is aborted
and reset. In this case, the cleaning light stops
blinking and the holder returns to its starting
position.
If the powerplug is removed from the wall socket
B
during the cleaning program, the holder will
remain in its current position.When the powerplug
is put back into the wall socket, the holder will
move to the highest position.
C
◗ When the cleaning light starts burning
continuously, the shaver is hygienically clean.
◗ If the shaver also needs to be charged, you
can simply leave it in the appliance after the
cleaning process.
ENGLISH
11