Plug & Play Feature - Samsung 5 Serie Manuel De L'utilisateur

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
N
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed.
N
1. Press the POWER button on the remote control. Select the OSD Language. menu
is automatically displayed. Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTER E button to confirm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER E button.
We recommend setting the TV to
N
home environment.
Store Demo mode is only intended for use in retail environments.
N
If the unit is accidentally set to
N
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTER E . Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER E button to confirm your
choice.
After selecting the country in the
N
When you input the PIN number,
N
4. Press the ▲ or ▼ button to memorise the channels of the selected connection, then press the ENTER E button.
• Air : Air antenna signal.
• Cable : Cable antenna signal.
5. Press the ▲ or ▼ button to select the channel source to memorise. Press the ENTER E button to select Start.
• Digital & Analogue : Digital and Analogue channels.
• Digital : Digital channels.
• Analogue : Analogue channels.
The channel search will start and end automatically.
N
For more detailed description of selecting Cable mode, refer to page 12.
N
6. The message Set the Clock Mode is displayed. Press the ENTER E button. Press the ▲ or ▼ button to select Auto, then Press
the ENTER E button.
If you select Manual, Set current date and time is displayed. (For a more detailed description of Manual, refer to page 23)
N
If you have received a digital signal, the time will be set automatically.
N
7. The brief instruction on How to get the best performance from your new HDTV. is displayed. Press the ENTER E button.
This menu is available
N
8. The message Enjoy your TV. is displayed. When you have finished, press the
ENTER E button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER E button.
2. Press the ENTER E button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is '0-0-0-0'.
If you want to change PIN number, refer to page 25.
N
The Plug & Play feature is only available in the TV mode.
N
Home Use mode for the best picture in your
Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
Country menu, some models may proceed with an additional option to setup the pin number.
0-0-0-0 is not available.
HD Connection Guide in the Support menu.
English - 11
Plug & Play
Select the OSD Language.
Nederlands
English
Menu Language :
Eesti
U
Plug & Play
Menu Language : English
Time
Broadcast
Security
General
▲
▼
E
Move Enter
►