Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Secure during transport:
When transporting in vehicles, secure the device against slipping. Never move the appliance while it is switched on.
Keep dry:
Never operate the device in puddles or in water. Do not store or operate outdoors. If the wiring or any part of the
device becomes wet, dry the device thoroughly before using. Protect against spray water.
Keep air vents free:
Do not cover or block the air inlets or outlets.
Do not use speed controller:
To reduce the risk of fire or electric shock, never operate the extraction fan with an electronic speed controller.
Fire hazard: never run the appliance in areas with open fire or heat sources. Do not use or store the device in area where
flammable vapors, solvents, thinners or petrol are stored.
Aeration and ventilation
For aeration and ventilation purposes set up the extraction
fan as required with the outlet side (arrow direction / ventilation), or the inlet side (aeration) on a flat, firm surface
in the open door or open window. The discharged air must not exceed a temperature of 60° C.
In small rooms place the extraction fan in the door frame in a way that allows the dust bag to spread out in the adjacent
space. Depending on the purpose and room size, it may be necessary to position the extraction fan properly to ensure
best possible extraction performance.
Detailed drawings
1.
Plastic housing
2.
Motor
3.
Fan wheel
4.
Hose fitting
5. + 6.
Complete operating element
7.
Power cable
8.
Condenser
29
Translation of the original instruction
Publicité
Table des Matières
