Ego Power+ NEXUS PST3040 Additif Au Guide D'utilisation page 21

5. While charging, the upper and lower polygonal areas in the corresponding
battery-indicator area will illuminate and the last segment of the circled power
indicator will flash, with other segments shinning. For more than two batteries
mounted on the power station, charging will occur sequentially. The upper and
lower polygonal areas of the symbol associated with each battery to be charged
will illuminate and the power indicator will communicate the present battery
capacity.
POWERING THE AC/USB DEVICES
NOTICE:
For optimum performance, fully charge all EGO batteries before use. The
battery should be charged in a location where the temperature is greater than 41°F
(5°C) and less than 104°F (40°C).
1. Mount battery(s) securely onto any battery-mounting slot of the Nexus power
station (Fig. 5). The Nexus can work with only one battery, but output power may
be limited.
5
2. Press the AC/USB cover-release button to open the corresponding cover (see Fig.
1c); connect the USB and/or AC devices to any ports on the Nexus power station.
N E X U
S P O
R E S E W E R
T
S T A T
IO N
P U R E
S I N E
W A V E
56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC
21