Ego Power+ NEXUS PST3040 Additif Au Guide D'utilisation page 20

CHARGING EGO PORTABLE BATTERIES (Fig. 3)
3
Battery
1. Connect the supplied charger between the power supply (120V~, 60Hz) and
the Nexus power station with the two supplied power cords. Make sure that the
connections are secure and reliable.
2. Align the raised ribs of the battery pack with the mounting slot in the Nexus
power station; slide the battery pack down onto the Nexus. Make sure that the
battery is securely attached to the Nexus.
3. The Nexus power station will communicate with the battery pack and begin
charging the battery.
4. The charging indicators on the LCD screen will illuminate and the power button
will slowly blink green. The screen displays the remaining charge time in
hours and minutes until the battery will be fully charged. When the charging is
completed, the charge-complete indicator will also illuminate and the power
button will shine solid green.
NOTE:
During the charging process, the LCD screen may turn black no display. You
can press any of the Power/USB/AC/Reset buttons or reattach the battery to reactivate
the display.
20
56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC
Supplied Charger
Supplied Power Cords
Power Supply