Support; Software Upgrade; Contact Samsung - Samsung BD-C6500 Manuel D'utilisation

Support

Software Upgrade

This menu allows you to upgrade software for
performance improvements or additional services.
You can check the current software version,
upgrade using the internet and set the Auto
upgrade notification. If the product is properly
connected to the network by cable or wirelessly,
the product will automatically connect to
Samsung's website each time it is turned on and
download update files if any valid upgrade exists.
Settings
Display Software Upgrade
Software Upgrade
Audio Disc Menu
System Audio
Current Version
Network Subtitle
By Internet
Language
Auto Upgrade Notification : On
Security
General
" Select
Support
1. To select By Internet, press the ENTER
button.
A popup message will appear if an update is
available.
2. If you select Yes, the product will turn off
automatically before restarting.
(Never turn it on manually.)
The update progress popup will appear.
3.
When the update is completed, the product
will turn back off automatically.
Press the POWER button to turn on the
4.
product.
NOTE
▪
The Update will be completed when the product
turns off after restarting. Press the POWER button to
turn on the updated product for your use.
Never turn off or on the product manually during the
update process.
▪
Samsung Electronics shall take no legal responsibility
for product malfunction caused an unstable internet
connection or consumer negligence during software
upgrade.
:
:
: XXX-XXXXXXXXX
:
\
' Return
You can also update software in any of the two
ways as follows: Software update is the same as
in the By Internet menu.
• USB : Visit www.samsung.com/bluraysupport,
then download and store the latest software
(RUF file) into a USB flash drive. Connect the
USB flash drive to the USB port of the product
(disc tray must be empty) to update the
software, then follow the on-screen instructions.
• CD/DVD : Visit www.samsung.com/
bluraysupport, download and write the latest
software (RUF file) onto a disc. Insert and play
the disc in the product to start the update, then
follow the on-screen instructions.
NOTE
▪
Software upgrades using the USB Host jack must be
performed with no disc inside.
▪
If you want to cancel the upgrade in the process of
downloading the upgrade data, press the ENTER
button.
▪
When the system upgrade is done, check the
software details in the software Upgrade menu.
▪
Do not turn off the product during the System
Upgrade, as it may cause the product to not work
properly.
▪
Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.

Contact Samsung

Provide contact information for assistance with
your product.

English