Package Contents; Optional Parts; Preparation - Panasonic MKG1500-DE Consignes D'installation

1-1. Package Contents

Check that the following are included in your package.
Power
Measuring Unit

1-2. Optional Parts

Item description
CT and 2m Cable for Power Measuring Unit
CT for Power Measuring Unit
CT Cable for Power Measuring Unit (2 m)
Extension Cable for Power Measuring Unit (1 m)

1-3. Preparation

3-phase 4-wire
circuit breaker
(max 20 A)
3x CT
(MAIN use)
Model number Contents
MKG1510-DE 3x CT, 1x Cable
MKG1520-DE 1xCT
1xCable (2 m)
MKG1530-DE
MKG1540-DE 1xCable (1 m)
2.5 mm 2
solid wire
6
■Thank you for purchasing.
■Please read Operating instructions and Installation Instructions
carefully before using this product, and save this manual for future use.
English Keep this ■This manual and the Installation Instructions available online
document should be read carefully to ensure correct installation.
■This device is to be installed by designated qualified electrician only.
Operating Instructions ■Users are not to modify the device. Please call the service desk
about any modifications or installation problems.
Power measuring unit ■Please follow the safety regulations of your region or country
when installing or specifying electronic devices.
This user manual is a simplified version. A more
detailed Installation Instructions is available online.
Model No. MKG1500-DE
URL https://
Disclaimers
Panasonic will bear no responsibility in the following cases.
■If this product is used as a measurement device for billing purposes.
■If data is lost or corrupted due to malfunction of this product.
■If losses arise due to use other than as described in the manual.
■If losses arise due to remodelling, including to the construction, performance or specification of the product, without Panasonic's approval.
■If losses arise due to use in a task requiring a high level of safety.
This device is not to be used in systems directly or indirectly related to medical devices or human life.
■The safety for any system incorporating the equipment is the responsibility of the assembler of the system.
For Your Safety
■Installation should be performed by a qualified electrician.
■If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
■Read these instructions carefully and look at the equipment to understand the devices before trying to install, operate, service, maintain it.
Explanation of symbols
■The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
■Where this symbol is marked, in order to find out the nature of the potential HAZARD and any actions which have to be taken
to avoid them.
WARNING Denotes a potential hazard that could CAUTION Denotes that a hazard that could result
result in serious injury or death. in minor injuries or property damage.
■The following are used to classify and descrive the type of instructions to be observed.
This symbol is used to alert users to a specific
This symbol is used to alert users to a specific
operating procedure that must not be performed. operating procedure that must be followed in order
to operate the unit safely.
WARNING
Do not disassemble or remodel, as When installing or inspecting the
this could cause electric shock or fire. device, switch the mains power off.
CT Cable
Leaving the power on during installation
Do not connect using any cable other
or inspection may cause electric shock.
than a CT cable to the CT connector. Compulsory
Prohibited
Do not use an IT earthing system, as
Failure to comply could cause electric
this could cause electric shock or fire.
shock, fire or malfunction.
CAUTION
(2 m)
Do not use outside the rated The power cable insulation should
voltage. be removed to suit the strip gauge
and inserted firmly.
Doing so may cause an accident.
Prohibited Compulsory Insufficient insertion may cause
overheating or fire.
Extension Cable (1 m)
(for 1 CT, extendable to 30 m)
Flat-head
screwdriver
(2.0 to 3.5 mm)
User
Manual
0
8A9 N16 XXXXXX