Listening Through A Receiver; Troubleshooting For Anynet - Samsung 6 Serie Mode D'emploi

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+ (HDMI-CEC).
. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the
N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the Media Play (USB & DLNA) feature, sound may not output properly through the receiver.
N
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the
N
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 30)

Troubleshooting for Anynet

Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet+ device...
appears on the screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
+
Solution
• Check if the device is an Anynet
• Connect only one receiver (home theater).
• Check if the Anynet device power cord is properly connected.
+
• Check the Anynet device's Video/Audio/HDMI 1.3 cable connections.
+
• Check whether Anynet (HDMI-CEC) is set to On in the Anynet+ setup menu.
+
• Check whether the TV remote control is in TV mode.
• Check whether it is Anynet
• Anynet+ doesn't work in certain situations. (Searching channels, Plug & Play, etc.)
• When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
• Check if the Anynet Function of Anynet+ device is set on.
+
• Check if the Anynet device is properly connected to the TV and check if the Anynet
+
(HDMI-CEC) is set to On in the Anynet
• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet menu and select a menu you want.
+
• Select View TV in the Anynet
• Press the SOURCE button on the TV remote control and select a device other than Anynet
devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device
is not connected.)
• You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
• You cannot use the play function when Plug & Play is in progress.
• Check whether or not the device supports Anynet
• Check whether or not the HDMI 1.3 cable is properly connected.
• Check whether Anynet (HDMI-CEC) is set to On in the Anynet
+
• Search Anynet devices again.
+
• You can connect an Anynet
not support Anynet functions.
+
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
• Check whether the antenna jack on the recording device is properly connected.
• Connect the optical cable between TV and the receiver.
English - 5
View TV
Device List
Recording
DVDR MENU
DVDR INFO
Receiver
Setup
device. The Anynet system supports Anynet
+ +
exclusive remote control.
+
Setup menu.
+
menu.
+
functions.
+
device using the HDMI 1.3 cable only. Some HDMI cables may
+
: DVDR
: On
Move Enter Return
U E R
devices only.
+
+
+
setup menu.
+